RM1050 - pich Max Prop

Toutes les questions techniques non spécifiques RM (Navigation, confort, sécurité, etc.). Ce forum est visible par tous...
gioi
Membre
Messages : 16
Enregistré le : 29 mars 2017, 18:52
Bateau : équipier
Localisation : Palermo

RM1050 - pich Max Prop

Messagepar gioi » 26 avr. 2018, 13:56

Dear friends, I own a RM1050 equipped with a Volvo Penta D1-30 and a Max Prop 2 blades. The engine is new, just replaced (same as before).
The maximum rpm should be 3200 rpm, but during the sea test the maximum rpm reached was 2750. On the base of experience of other 1050 users, I would be grateful to know the best pich setup degrees.
I clarify that during the sea test, both bottom and prop were clean.

All the best.
gioi

Avatar de l’utilisateur
éric
Membre
Messages : 1068
Enregistré le : 22 févr. 2006, 17:34
Bateau : ex proprio Ovento, RM 1050, n° 21

Re: RM1050 - pich Max Prop

Messagepar éric » 26 avr. 2018, 19:11

I own the RM1050 #21 which has a Yanmar engine 3FC, probably equivalent to your Volvo D1-30.
My MaxProp 2 blades is the standard old one (mounted in 2003) and tomorrow I will be onboard and send you the pich setup degrees I use. I am happy with this setting which is the same for15 years. The MaxProp was just refitted last month because of backlash.
Éric P.

Avatar de l’utilisateur
Vennec
Membre
Messages : 80
Enregistré le : 30 juin 2017, 10:02
Bateau : Pikou Panez, RM 1050, n° 7
Localisation : Douarnenez

Re: RM1050 - pich Max Prop

Messagepar Vennec » 28 avr. 2018, 22:01

I also have a RM 1050 with a Volvo D1-30 and a Maxprop 17" 2 blades propeller.
My pitch adjustment is a 20 degrees blade angle.
I cannot say if it's a good setting as I've only bought my ship a couple of month ago and haven't sailed much, so far...

The previous owner sailed more than 20000 miles, I suppose he was happy with this pitch setting...

gioi
Membre
Messages : 16
Enregistré le : 29 mars 2017, 18:52
Bateau : équipier
Localisation : Palermo

Re: RM1050 - pich Max Prop

Messagepar gioi » 29 avr. 2018, 08:41

Thank you very much for your replies.
@Vennec: when you will be able to make a test, please let me know what is the maximum rpm reached under engine in calm water and clean bottom/propeller.
Many thanks.


Retourner vers « Forum technique général »

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 6 invités